Unboxing & Installing Your 10” Calendar

  • Updated

Thank you for purchasing a Skylight Calendar!

Contents of the Box

The Skylight Calendar box should contain:

  • Skylight Calendar
  • Quick Start Guide
  • Magnetic Stand
  • Seven foot long power cable (USB-A to barrel jack)
  • Power adapter (USB-A)

Remove the top piece of foam and gently lift the Skylight Calendar out of the box. The stand and power accessories are in the box under the Calendar.

Carefully peel the protective film off of the screen.

Attach the Stand or Mount on the Wall

The Skylight Calendar comes with two mounting options:

  • A magnetic stand, for placing the Calendar on a table, desk, countertop, or other flat surface
  • Hanging the Calendar on the wall

Use the magnetic stand to support the Calendar on a flat surface.

Attach the stand to the Calendar:

  1. Lay the calendar face down on a clean, flat surface.
  2. Insert the magnetic stand into the back of the Calendar.
    You can attach the magnetic stand to display the Calendar in either landscape (option 1) or portrait (option 2) mode.
  3. Plug the barrel connector end of the power cable into the Calendar.
  4. Plug the other end of the power cable into the adapter.
  5. Plug the adapter into a nearby electrical outlet.

Hang the Calendar on the wall.

When choosing a place to hang your Calendar Max, make sure a power outlet is nearby.

To hang the Calendar on a wall, you will need to supply mounting hardware (a screw, or a screw and anchor).

Hang the Calendar on a wall:

  1. Attach mounting hardware to the wall.
  2. Plug the barrel connector end of the power cable into the Calendar.
  3. Place the Calendar against the wall, with one of the round holes over the mounting hardware..
    You can mount the Calendar on the wall in either landscape or portrait orientation.  
  4. Lower the calendar until the mounting hardware seats in the bottom of the hole.
    Make sure the Calendar is well supported by the mounting hardware.
  5. Plug the other end of the power cable into the adapter.
  6. Plug the adapter into a nearby electrical outlet.

Related to

Was this article helpful?

Have more questions? Submit a request